MTD 464 Betriebsanleitung PDF herunterladen (Seite 133)

100

101

ARMY TM 9-6115-464-34

AIR FORCE TO 35C2-3-445-2

NAVY NAVFAC P-8-624-34

d. Assembly.

(1) Press drive gear (19, figure 3-31) onto shaft (20).

(2) Insert shaft into pump body (22) and press gear (12) onto shaft until a dimension of 4.84375 ± 0.010

inches is obtained between the mounting flange and the top of the drive flange (figure 3-32). For

type 1 dimensions use 4.220 +/– .010M

(3) Press shaft (21, figure 3-31) into pump body and install driven gear (18).

(4) Install cover plate (17) and secure with Iockwashers (16 and 14) and screws (15 and 13).

(5) Insert plunger (10) into valve body (11). Install spring (9) and retainer(8) and secure with roll pin (7).

(6) Install new seal (6), Iockwasher (5) and pressure relief valve (4).

(7) Check that drive shaft rotates freely. If shaft binds, disassemble pump and ascertain cause before

installing.

(8) Install pickup screen (3) and tighten.

NOTE

Pickup screen must be in the horizontal position when the pump is installed in the

engine.

e. Installation.

(1) Install oil pump, making sure that drive gear mates correctly with speed switch drive assembly.

(2) Install oil pan (paragraph 3-37).

3-79

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 492 493

Kommentare zu diesen Handbüchern

Keine Kommentare

MTD 464 Betriebsanleitung Seite 133

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Gartenschredder MTD 464