MTD 27-Ton Wartungshandbuch PDF herunterladen (Seite 65)

Maintenance

Lubrication

To help keep the MTD log splitter in proper running order, MTD recommends the following maintenance intervals

be used (adjustable to local conditions).

* First oil change at 5 hours

Beam and wedge

The beam and wedge should be cleaned and oiled every time the log splitter is used. To clean the beam and

wedge:

1. Brush all dirt and debris out of the log dislodger.

2. Brush all dirt and debris off of the beam and from under the wedge.

NOTE: Any debris trapped under the wedge can prevent the wedge from moving freely up and down the

beam. This can result in failure of the wedge and damage the beam.

3. Put a small amount of engine oil on a shop rag or a paper towel.

4. Wipe the beam down with the oiled rag so that there is a light coat of oil on the beam.

Maintenance Point Interval

Clean beam and wedge

of debris

Every use

Oil the beam Every use

Engine oil change 25 hours*

Hydraulic oil change 100 hours

Hydraulic oil filter 50 hours

Wheel bearings varies with distance and

speed towed

CHAPTER 8: MAINTENANCE

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 60 61 62 63 64 65 66 67 68 69 70 71 72

Keine Kommentare

MTD 27-Ton Wartungshandbuch Seite 65