MTD 27-Ton Wartungshandbuch PDF herunterladen (Seite 36)

2010 Log Splitters

6. Disconnect the high pressure hose from the pump.

7. Disconnect the high pressure supply hose from the

valve using a 15/16” wrench.

See Figure 4.3.

8. Disconnect the high pressure hose that connects

the valve to the base of the cylinder.

9. Remove the return hose fitting:

9a. Hold the fitting with a 1” wrench.

See Figure 4.4.

9b. Back off the jam nut with a 1” wrench.

9c. Remove the fitting.

10. Remove the two screws that hold the valve to the

mounting bracket using a 9/16” wrench.

See Figure 4.5.

11. Remove the two screws that hold the mounting

bracket to the cylinder using a 1/2” wrench.

See Figure 4.5.

Figure 4.3

Control valve

high pressure

supply hose

Hose to the

cylinder

Figure 4.4

Jam nut

Return hose fitting

Figure 4.5

Mounting bracket

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 71 72

Keine Kommentare

MTD 27-Ton Wartungshandbuch Seite 36