Mtd 241-521-000 Bedienungsanleitung PDF herunterladen (Seite 6)

Reservoir

Tank

Ton 3ue

FIGURE 4.

Hex Bolts

Lock Washers

Hex Nuts

Lock Wasliers

Hitcf!

Jack Stand

FIGURE 5.

Beam Support/

Latch Bracket

Bolt

Lock

Washer

Hex

Nut

FIGURE 6.

AHACHING TONGUE TO RESERVOIR TANK

1. The tongue is shipped with the jack stand already

attached to the tongue. The jack stand is in the

transport position. Remove the spring pin and

clevis pin. Pivot the jack stand to the operating

position (90®), and secure with the clevis pin and

---------

spring pin. See figure 3.

Remove the two hex bolts, lock washers and hex

nuts on the front of the reservoir tank. Two 9/16"

wrenches are required. Place the tongue in posi

tion, and secure with hardware just removed. See

-figure 4.

INSTALLING THE HITCH

1. Using two 9/16" wrenches, remove the two long

hex bolts, lock washers and hex nuts which are

assembled through the sides of the hitch. Do not

remove the chain and spacer from the one hex

bolt.

....

Place the hitch in position on the end of the tongue

.........

-as shown in figure 5. Secure with hardware just

removed.

AHACHING THE WEDGE, BEAM AND CYLINDER

ASSEMBLY

1. Stand the wedge, beam and cylinder assembly

upright.

2. Remove the cotter pin from the hinge pin, located

on top of the reservoir tank assembly. Move the

reservoir tank assembly in position against the

beam.

3. Insert hinge pin just removed through welded

brackets on beam and reservoir tank assembly.

Secure with cotter pin, bending the ends of the pin

in opposite directions.

AHACHING THE BEAM SUPPDRT/LATCH BRACKET

1. Remove the two hex bolts, lock washers and hex

nuts from the tongue, using two 9/16" wrenches.

2. Place the beam support/latch bracket on the

tongue as shown in figure 6. Secure with hex bolts,

lock washers and hex nuts just removed. Tighten

securely.

1 2 3 4 5 6 7 8 9 10 11 ... 17 18

Kommentare zu diesen Handbüchern

Keine Kommentare

Mtd 241-521-000 Bedienungsanleitung Seite 6

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Mtd 241-521-000