MTD E150 Betreibershandbuch PDF herunterladen (Seite 10)

SNOW THROWER OPERATING CONTROLS

Model 140

Auger

Control

Handle

Model 140

(w/ Optional Ext. Models 150,151

Chute Crank)

AJger 1

Control

_'4andle

_. Chute

Models 142,152

172,173

AJger

Control

Handle

_CrankChut

T_ E1

Figure 11

Auger Control Handle - Located on the upper handle, the auger control handle is used to engage and disengage

the augers. See Figure 11. The snow thrower is designed to be propelled by the rotation of the augers. Pull the

control handle back against the upper handle to engage the augers; release to disengage. See "Operating Tips"

under "Operating the Snow Thrower" for more detail.

Chute Crank - Located on right side of dash panel, See Figure 11. The Chute Crank determines the direction

snow will be discharged. Turn clockwise to discharge snow to the left. Turn counterclockwise to discharge to the

right,

_ Greater

Distance

Less

Distance

Hand

Knob

Figure 12

Discharge Chute - The angle of the discharge chute controls the distance the snow is thrown. The distance snow

is thrown can be adjusted by tilting the discharge chute up for greater distance, or tilting down for less distance.

Loosen the hand knob on the side of the discharge chute to adjust, Tilt the chute to desired position, and tighten

hand knob. See Figure 12.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 23 24

Keine Kommentare

MTD E150 Betreibershandbuch Seite 10