Mtd 24638L Bedienungsanleitung PDF herunterladen (Seite 8)

OPERATION

BEFORE STARTING

NOTE

Refer to engine manual packed with

log splitter for complete instructions

for the care and maintenance of en

gine. READ DIRECTIONS CARE

FULLY.

Fill sump with oil as instructed in the sepa ate

engine manual. Drain and fill the engine from

the same opening. See figure 10.

FIGURE 10.

Fill fuel tank, using clean, fresh, regular g ade

automotive gasoline. Fill tank completely.

Fill reservoir tank on log splitter. Remove the

breather plug from breather tube. See fijure

11. Pour approximately 2 gallons of De);ron

automatic transmission fluid ONLY into brea:her

tube.

CAUTION

DO NOT operate log splitter without

proper amount of oil in reservior tank

beam.

TO START ENGINE

1. Place throttle control lever (on engine) in RUN

position, towards the front of splitter. See figure

12.

THRO

FIGURE 12.

Open the breather valve. Valve must be open

when running log splitter. Valve must be closed

when transporting log splitter. See figure 13.

Grasp starter handle, place one foot on wheel and

pull starter handle with a quick, full arm stroke.

Return rope slowly to the engine.

VALVE IN CLOSED

POSITION

VALVE IN OPEN

POSITION

BREATHER PLUG AND VALVE

NOTE: Valve has left hand threads.

Turn clockwise to close.

FIGURE 11.

FIGURE 13.

TO STOP ENGINE

1. Move throttle control lever to STOP position.

2. Remove high tension wire from spark plug to

prevent accidental starting by children while

equipment is unattended.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Mtd 24638L Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Mtd 24638L