MTD World Tiller - Series 240 Betreibershandbuch PDF herunterladen (Seite 13)

DepthStake

The depth stake acts as a brake for the tiller and controls the

depth and speed at which the machine will operate, Figure 6-2.

Remove the clevis and cotter pins, raise or lower the depth stake,

then reattach pins to secure.

Figure 6-2

Off-SeasonStorage

If the tiller will not be used fora period longer than 30 days, the

following steps should be taken to prepare the tiller for storage.

Clean the exterior of the engine and the entire tiller

thoroughly. Lubricate the tiller as described in the

Lubrication instructions.

We do not recommend the use of pressure washers to

clean your tiller. They may cause damage to spindles,

pulleys, bearings, or the engine. The use of pressure

washers will result in shortened life and reduce

serviceability.

Refer to the engine manual for correct engine storage

instructions.

Wipe tines with oiled rag to prevent rust.

Store tiller in a clean, dry area. Do not store next to

corrosive materials, such as fertilizer.

When storing any type of power equipment in an

unventilated or metal storage shed, care should be taken

to rustproof the equipment. Using a light oil or silicone,

coat the equipment and especially any springs, bearings,

and cables.

SECTION 6 -- MAINTENANCE & ADJUSTMENTS 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 27 28

Keine Kommentare

MTD World Tiller - Series 240 Betreibershandbuch Seite 13