MTD CSV 020 Spezifikationen PDF herunterladen (Seite 14)

Service

BladeCare

_kk ARNING: Before performing any type of

maintenance on the machine, wait for all parts to

stop moving and disconnect the spark plug wire.

Failure to follow this instruction could result in

personal injury or property damage.

NOTE: When tipping the unit, empty the oil and fuel tank and

keep engine spark plug side up.

1. Disconnect and ground the spark plug wire to retaining

post.

2. Remove bag assembly.

3. Remove the three hex cap screws holding the chipper

chute to the upper housing. See Fig. 7-1.

Figure 7-1

4. Remove the flange lock nuts, front wheels, and wave

washers that attach to the pivot arm assemblies. See Fig.

7-2.

Bell

Washer

Front Support Bracel

L6ck Nut

Pivot Arm

Assembly

Thrust

Washer /

Shoulder

Screw

Lock Nut

Figure 7-2

Remove the shoulder screws, thrust washers, and bell

washers that go through the pivot arms to the front

support brace. The front support brace and lock nut can be

removed at this time as well.

Remove the three screws on the upper housing that secure

the nozzle cover. See Fig. 7-3.

Figure 7-3

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

MTD CSV 020 Spezifikationen Seite 14