MTD 683 Betreibershandbuch PDF herunterladen (Seite 10)

10 Section 4 — ASSembly & inStAllAtion

Assembling and Installing the Weight Bar

Assemble, then attach the weight bar to the front steering

assembly using the hardware in pack 683-05063, as shown in

Figure 4-8 and Figure 4-10.

1. Install the counter weight mounting bracket to the counter

weight using two 710-0572 carriage bolts, two 736-0159

flat washers and two 712-04063 flange lock nuts from

hardware pack 683-05063. See Figure 4-8.

Figure 4-8

2. If present, remove the bumper from the tractor.

Note: Some tractors come equipped with a bumper

installed. The bumper may be retained for later use in case

in which the bagger is removed.

Figure 4-9

3. Secure the weight bar assembly to the tractor using two

710-0378 hex bolts, two 736-0159 flat washers and two

712-04063 flange lock nuts from hardware pack 683-05063.

Note: Use the top holes on the tractor frame.

Figure 4-10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

MTD 683 Betreibershandbuch Seite 10