Mtd 24596L Bedienungsanleitung PDF herunterladen (Seite 7)

OPERATION

1. Fill the crankcase with oil using a high quality

detergent oil classified "For Service MS". Use

SAE 30 oil. Nothing should be added to the

recommended oil.

Place the engine level. Remove oil fill cap. FILL

THE OIL SUMP TO POINT OF OVERFLOW. Pour

slowly. See figure 9.

FIGURE 9.

. Fill the fuel tank with clean, fresh, lead-free,

low-lead or regular grade leaded gasoline. DO

NOT MIX OIL WITH GASOLINE.

3. Pull the choke control out to "choke" position

if necessary. See figure 10.

CAUTION

Never operate this edger unless wear

ing safety glasses or some other suit

able eye protection at all times the

engine is running.

To stop the edger engine, push the grounding clip

against the spark plug. See figure 11.

FIGURE 11.

Depth Control Adjustment - The clutching and

declutching of the belt is accomplished by moving

the clutch lever. To declutch, pull the clutch lever

towards you as you operate the edger. The farther

you push the clutch lever forward, the deeper the

cut.

PULL OUT TO CHOKE

FIGURE 10.

. Grasp the starter handle and pull out the cord

rapidly. Return it slowly to the engine.

5. After engine starts, push choke control in grad

ually.

ADJUSTMENTS

®C

WARNING

Disconnect the spark plug wire and

ground against the engine before per

forming any adjustments, repairs or

maintenance.

Front Wheel Adjustment

The front wheel may be raised or lowered to give

added cutting depth.

Loosen the second bolt on the front wheel support

bracket. Pivot the bracket up or down to desired

height. Retighten bolt. See figure 12.

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

Mtd 24596L Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Werkzeug Mtd 24596L