MTD 24632B Bedienungsanleitung PDF herunterladen (Seite 3)

2 PN: 11410-00524 Rev. J MS2723C TDS

Specifications Spectrum Master™ MS2723C

Spectrum Analyzer

All specifications and characteristics apply to instruments under the following conditions, unless otherwise stated: 1) Instrument within its recommended calibration cycle, 2) After 5 minutes of

warm-up time, where the instrument has completely stabilized to the ambient temperature, 3) Internal frequency reference used, 4) Cable analyzer and VNA measurements applicable after standard

OSL calibration is performed using Anritsu calibration components, 5) Typical data does not include guard band for measurement uncertainty and temperature variation and is not warranted, 6) All

specifications subject to change without notice, 7) Recommended calibration cycle is 12 months.

Measurements

Smart Measurements

Field Strength (uses antenna calibration tables to measure dBm/m

, dBW/m

, V/m, A/m, Watt/m

Watt/cm

, or dBmV/m)

Occupied Bandwidth (measures 99 % to 1 % power channel of a signal)

Channel Power (measures the total power in a specified bandwidth)

ACPR (adjacent channel power ratio)

AM/FM/SSB Demodulation (wide/narrow FM, upper/lower SSB), (audio out only)

C/I (carrier-to-interference ratio)

Emission Mask (recall limit lines as emission mask)

Setup Parameters

Frequency

Center/Start/Stop, Span, Frequency Step, Signal Standard, Channel #

Amplitude

Reference Level (RL), Scale, Attenuation Auto/Level, RL Offset, Pre-Amp On/Off, Detection

Span

Span, Span Up/Down (1-2-5), Full Span, Zero Span, Last Span

Bandwidth

R B W, A u t o R B W, V B W, A u t o V B W, RBW/VBW, Span/RBW

File

Save, Recall, Delete, Directory Management

Save/Recall

Setups, Measurements, Limit Lines, Screen Shots JPEG (save only), Save-on-Event

Save-on-Event

Crossing Limit Line, Sweep Complete, Save-then-Stop, Clear All

Delete

Selected File, All Measurements, All Mode Files, All Content

Directory Management

Sort Method (Name/Type/Date), Ascend/Descend, Internal/USB, Copy

Application Options

Impedance (50 Ω, 75 Ω, Other)

Sweep Functions

Sweep

Single/Continuous, Manual Trigger, Reset, Detection, Minimum Sweep Time, Trigger Type

Sweep Mode

Fast, Performance, No FFT, Burst Detect

Detection

Peak, RMS/Avg, Negative, Sample, Quasi-peak

Trig g ers

Free Run, External, Video, Delay, Level, Slope, Hysteresis, Holdoff, Force Trigger Once

Trace Functions

Traces

Up to three Traces (A, B, C), View/Blank, Write/Hold, Trace A/B/C Operations

Trace A Operations

Normal, Max Hold, Min Hold, Average, # of Averages, (always the live trace)

Trace B Operations

A –> B, B <–> C, Max Hold, Min Hold

Trace C Operations

A –> C, B <–> C, Max Hold, Min Hold, A – B –> C, B – A –> C, Relative Reference (dB), Scale

Marker Functions

Markers

Markers 1-6 each with a Delta Marker, or Marker 1 Reference with Six Delta Markers,

Marker Table (On/Off/Large), All Markers Off

Marker Types

Style (Fixed/Tracking), Noise Marker, Frequency Counter Marker

Marker Auto-Position

Peak Search, Next Peak (Right/Left), Peak Threshold %, Set Marker to Channel,

Marker Frequency to Center, Delta Marker to Span, Marker to Reference Level

Marker Table

1-6 markers frequency and amplitude, plus delta markers frequency offset and amplitude

Limit Line Functions

Limit Lines

Upper/Lower, On/Off, Edit, Move, Envelope, Advanced, Limit Alarm, Default Limit

Limit Line Edit

Frequency, Amplitude, Add Point, Add Vertical, Delete Point, Next Point Left/Right

Limit Line Move

To Current Center Frequency, By dB or Hz, To Marker 1, Offset from Marker 1

Limit Line Envelope

Create Envelope, Update Amplitude, Number of Points (41), Offset, Shape Square/Slope

Limit Line Advanced

Type (Absolute/Relative), Mirror, Save/Recall

Frequency

Frequency Range

9 kHz to 13 GHz (tunable to 0 Hz), Preamp 100 kHz to 13 GHz

Tuning Resolution

1Hz

Frequency Reference

Aging: ±1.0 ppm/10 years

Accuracy: ±0.3ppm (25°C ±25°C) +aging

Auto-sensing External Frequency

Reference

1, 1.2288, 1.544, 2.048, 2.4576, 4.8, 4.9152, 5, 9.8304, 10, 13, 19.6608 MHz

Frequency Span

10 Hz to 13 GHz including zero span

Sweep Time

10 µs to 600 seconds in zero span

Sweep Time Accuracy

±2 % in zero span

Bandwidth (Performance Sweep Mode)

Resolution Bandwidth (RBW)

1 Hz to 10 MHz in 1–3 sequence ±10 % (–3 dB bandwidth)

Video Bandwidth (VBW)

1 Hz to 10 MHz in 1–3 sequence (–3 dB bandwidth)

RBW with Quasi-Peak Detection

200Hz, 9kHz, 120kHz (–6dB bandwidth)

VBW with Quasi-Peak Detection

Auto VBW is On, RBW/VBW = 1

1 2 3 4 5 6 7 8 ... 24 25

Kommentare zu diesen Handbüchern

Keine Kommentare

MTD 24632B Bedienungsanleitung Seite 3

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Holzspalter MTD 24632B