MTD Series 520 Thru 530 Betreibershandbuch PDF herunterladen (Seite 11)

HandleHeightAdjustment

Your mower is shipped with the handle in the higher

height position. To lower the height proceed as follows:

Remove the starter rope from the rope guide,

Disconnect the handle from the handle bracket

assemblies by removing the wing nuts.

See Figure 10.

Position each handle bracket assembly stud into

one of the other holes in the lower handle.

Each end of the lower handle must be placed in

same relative position.

EngineAdjustments

See the separate engine manual packed with your unit

for adjustments to the engine.

Lower'

Handle

Bracket

Figure 10

Nuts

SECTION7: MAINTAININGYOURLAWNMOWER

CustomerResponsibilities

MAINTENANCE o,_ _ _ _ _ _ SERVICE

SCHEDULE

£ £ ,o_ .co° no< DATES

Lubricate Wheels

0 Lubricate Blade Control

:::3

_ Clean Deck

n Blade Care

Check Oil

Change Oil

Replace Air Filter

_ Clean Engine

Check Spark Plug

Check Spark Arrester (if any)

GeneralRecommendations

Always observe safety rules when performing any

maintenance.

Changing of engine governed speed will void

engine warranty.

The warranty on this lawn mower does not cover

items that have been subjected to operator abuse

or negligence. To receive full value from the

warranty, operator must maintain the lawn mower

as instructed in this manual.

Lubrication

Some adjustments will have to be made

periodically to maintain your unit properly. All

adjustments in the Making Adjustments section of

this manual should be checked at least once each

season.

Periodically check all fasteners and make sure

these are tight.

Follow the maintenance schedule under Customer

Responsibilities to get quality performance from

your lawn mower.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

MTD Series 520 Thru 530 Betreibershandbuch Seite 11

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Rasenmäher MTD Series 520 Thru 530