MTD 645B thru 651B Technical Information PDF herunterladen (Seite 19)

1.4.3 Starting the On-Line Monitor(G-50A connection)

* To use the Maintenance Tool via G-50A (Network), license registration for the G-50A to be used is

necessary.

Purchasing the license No. for each G-50A to be used, conduct the license registration through the

Web browser (http : // [IP address of the G-50A]/ administrator.html). After selecting "Maintenance Tool"

of the optional function

on the Web Browser Screen displayed, enter the purchased license No..

For the detail of the license registration, see Chapter 4 [Registering a License for Optional Functions] of

Central Controller Model: G-50A Web Browser Operation Manual (For manager).

* To use the Maintenance Tool via G-50A (Only for LAN mode and Dialup connection mode), please check a

setup of Internet Connection Firewall of PC. If the FIREWALL function is used, communication will be normally

impossible with G-50A, and normal data will not be displayed.

For detail, please refer to [6. How to change setting of Firewall].

In the case of permanently installing an anti-virus software and always started under this environment, the fire

wall function of this software may be activated sometimes. In such case, The normal communication with

G-50A will be hindered not displaying data normally. When operating Maintenance Tool, finish the anti-virus

software once or remove the fire wall function.

1.4.3.1 In case for local connection

In the case when on line monitoring is applied to air conditioning system via G-50A by connecting the

Maintenance Tool to LAN locally.

(1) Clicking "G-50A(Network)" on the selection screen of

Monitor mode selects "Local connection" simultaneously.

Last click " ."

(2) Next IP address input screen is displayed. Here,input IP

address of G-50A connected to the air conditioning system

of which operating information is desired to monitor, and

click on .

NOTE:

• It is required to set to the IP address in the same system with G-50A to be connected to Maintenance Tool PC

from [Control Panel].

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 143 144

Keine Kommentare

MTD 645B thru 651B Technical Information Seite 19