MTD 25cc Spezifikationen PDF herunterladen (Seite 44)

P25 Series of Engines

6. Inspect the O-ring between the insulator block and

the cylinder. See Figure 5.32.

7. Install the insulator by following the previous steps

in reverse order.

NOTE: Apply a small amount of releasable thread

locking compound such as Loctite® 242

(blue) to the carburetor insulator block to cyl-

inder screws. Tighten them to a torque of 45

- 50 in lbs (5 - 6 Nm).

8. Test run the engine before returning it to service.

Figure 5.32

O-ring

For Parts Call 606-678-9623 or 606-561-4983

www.mymowerparts.com

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 63 64

Keine Kommentare

MTD 25cc Spezifikationen Seite 44