Autodesk VRED Professional 2015
Material: Brushed metal
Create a BrushedMetalMaterial for the rims.
• Right-click in Materials tab and select Create > Brushed Metal.
• Rename the Brushed Metal to Rim Material.
• Assign the Rim Material material to the front left and front right rim.
• Set the metal type to Aluminium.
• In the Brush Orientation section, set the Brush Mapping orientation
to Radial YZ.
• Set the Size U and V value to 0.3.
• Select the front left rim and press Get Center in the material’s Radial
• Mapping section.
• Enable the Use Structure check box in the Bump Texture section.
• Set the Bump Intensity value to 1.
Duplicate the Rim Material and assign the duplicated
material to the rear rims.
• Right-click on the Rim Material in the Material Editor > Material tab.
Select Edit > Duplicate.
• Rename the duplicated material to Rim Material_back.
• Assign the Rim Material_back material to the rear rims.
• Select the left rear rim and press the Get Center button in the
material’s Radial Mapping section.
Kommentare zu diesen Handbüchern