MTD 190 Bedienungsanleitung PDF herunterladen (Seite 8)

SECTION 2: OPERATING THE BLADE

SECTION 3: ADJUSTMENTS

CAUTION: Always lower blade to ground

before leaving tractor.

The lift handle, located on the left side of the snow blade,

is used to raise and lower the blade. Pulling the lift handle

all the way back raises the snow blade. Move the lift

handle forward to lower the snow blade to the ground.

The angle of the blade can be adjusted to the right or left

by pulling back on the angle lock bar, shown in figure 15,

and repositioning the head of the blade to the right, left or

center.

Always begin with the engine speed at the lowest pos-

sible setting, and gradually increase speed as required.

When working in a large area, do not attempt to move the

snow or dirt all in the same direction, causing an exces-

sive buildup, which would become larger with each pass.

CAUTION: Know the terrain. Avoid

exceptionally sharp slopes or drop offs which

may be hidden by the snow. Never run the

snow blade into heavy material at high speed.

Figure 15

CAUTION: Inspect the area to be worked

carefully before operating the snow blade.

Avoid pipes, roots, curbs or other heavy

obstructions.

To Adjust Blade Spring

The blade adjust spring allows the blade to tilt forward to

bypass solid obstructions. The normal adjustment is for

the spring bolt to extend 1" through the top of the blade.

To increase the spring tension loosen the knob, screw

the nut farther down onto the bolt and then retighten the

knob.

To decrease the spring tension loosen the knob, screw

the nut farther out toward the end of the bolt and then

retighten the knob. Refer to figure 8 on page 6.

To Adjust Skid Shoes

The skid shoes at the ends of blade may be raised for

close work on smooth surfaces or lowered to raise the

blade to work on rough or uneven areas. Make sure both

shoes are set evenly and that the nuts are retightened

securely.

ANGLE

LOCK

BAR

1 2 3 4 5 6 7 8 9 10 11 12

Kommentare zu diesen Handbüchern

Keine Kommentare

MTD 190 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Schneewerfer MTD 190